GitLab container registry administration Tier: Free, Premium, Ultimate Offering: Self-managed

The next-generation container registry is now available for upgrade and testing on self-managed instances as a beta feature. This upgraded registry supports online garbage collection, and has significant performance and reliability improvements.

registry:
  enabled: true
  host: registry.gitlab.example.com
  port: 5005
  api_url: http://localhost:5000/
  key: config/registry.key
  path: shared/registry
  issuer: gitlab-issuer
Where:
Parameter
Description
enabled
true or false. Enables the Registry in GitLab. By default this is false.
The host URL under which the Registry runs and users can use.
The port the external Registry domain listens on.
api_url
The internal API URL under which the Registry is exposed. It defaults to http://localhost:5000. Do not change this unless you are setting up an external Docker registry.
The private key location that is a pair of Registry’s rootcertbundle.
This should be the same directory like specified in Registry’s rootdirectory. This path needs to be readable by the GitLab user, the web-server user and the Registry user.
issuer
This should be the same value as configured in Registry’s issuer.
A Registry init file is not shipped with GitLab if you install it from source.
Hence, restarting GitLab does not restart the Registry should
you modify its settings. Read the upstream documentation on how to achieve that.
At the absolute minimum, make sure your Registry configuration
has container_registry as the service and https://gitlab.example.com/jwt/auth
as the realm:
auth:
  token:
    realm: https://gitlab.example.com/jwt/auth
    service: container_registry
    issuer: gitlab-issuer
    rootcertbundle: /root/certs/certbundle
If auth is not set up, users can pull Docker images without authentication.
Container registry domain configuration
You can configure the Registry’s external domain in either of these ways:
Use the existing GitLab domain.
The Registry listens on a port and reuses the TLS certificate from GitLab.
Use a completely separate domain with a new TLS certificate
for that domain.
Because the container registry requires a TLS certificate, cost may be a factor.
Take this into consideration before configuring the container registry
for the first time.
Configure container registry under an existing GitLab domain
If the container registry is configured to use the existing GitLab domain, you can
expose the container registry on a port. This way you can reuse the existing GitLab TLS
certificate.
If the GitLab domain is https://gitlab.example.com and the port to the outside world is 5050,
to configure the container registry:
Edit gitlab.rb if you are using a Linux package installation.
Edit gitlab.yml if you are using a self-compiled installation.
Ensure you choose a port different than the one that Registry listens to (5000 by default),
otherwise conflicts occur.
Host and container firewall rules must be configured to allow traffic in through the port listed
under the registry_external_url line, rather than the port listed under
gitlab_rails['registry_port'] (default 5000).
Linux package (Omnibus)
Your /etc/gitlab/gitlab.rb should contain the Registry URL as well as the
path to the existing TLS certificate and key used by GitLab:
registry_external_url 'https://gitlab.example.com:5050'
The registry_external_url is listening on HTTPS under the
existing GitLab URL, but on a different port.
If your TLS certificate is not in /etc/gitlab/ssl/gitlab.example.com.crt
and key not in /etc/gitlab/ssl/gitlab.example.com.key uncomment the lines
below:
registry_nginx['ssl_certificate'] = "/path/to/certificate.pem"
registry_nginx['ssl_certificate_key'] = "/path/to/certificate.key"
Save the file and reconfigure GitLab
for the changes to take effect.
Validate using:
openssl s_client -showcerts -servername gitlab.example.com -connect gitlab.example.com:5050 > cacert.pem
If your certificate provider provides the CA Bundle certificates, append them to the TLS certificate file.
An administrator may want the container registry listening on an arbitrary port such as 5678.
However, the registry and application server are behind an AWS application load balancer that only
listens on ports 80 and 443. The administrator may remove the port number for
registry_external_url, so HTTP or HTTPS is assumed. Then, the rules apply that map the load
balancer to the registry from ports 80 or 443 to the arbitrary port. This is important if users
rely on the docker login example in the container registry. Here’s an example:
registry_external_url 'https://registry-gitlab.example.com'
registry_nginx['redirect_http_to_https'] = true
registry_nginx['listen_port'] = 5678
Self-compiled (source)
Open /home/git/gitlab/config/gitlab.yml, find the registry entry and
configure it with the following settings:
registry:
  enabled: true
  host: gitlab.example.com
  port: 5050
Save the file and restart GitLab for the changes to take effect.
Make the relevant changes in NGINX as well (domain, port, TLS certificates path).
Users should now be able to sign in to the container registry with their GitLab
credentials using:
docker login gitlab.example.com:5050
Configure container registry under its own domain
When the Registry is configured to use its own domain, you need a TLS
certificate for that specific domain (for example, registry.example.com). You might need
a wildcard certificate if hosted under a subdomain of your existing GitLab
domain. For example, *.gitlab.example.com, is a wildcard that matches registry.gitlab.example.com,
and is distinct from *.example.com.
As well as manually generated SSL certificates (explained here), certificates automatically
generated by Let’s Encrypt are also supported in Linux package installations.
Let’s assume that you want the container registry to be accessible at
https://registry.gitlab.example.com.
Linux package (Omnibus)
Place your TLS certificate and key in
/etc/gitlab/ssl/registry.gitlab.example.com.crt and
/etc/gitlab/ssl/registry.gitlab.example.com.key and make sure they have
correct permissions:
chmod 600 /etc/gitlab/ssl/registry.gitlab.example.com.*
After the TLS certificate is in place, edit /etc/gitlab/gitlab.rb with:
registry_external_url 'https://registry.gitlab.example.com'
The registry_external_url is listening on HTTPS.
Save the file and reconfigure GitLab for the changes to take effect.
If you have a wildcard certificate, you must specify the path to the
certificate in addition to the URL, in this case /etc/gitlab/gitlab.rb
looks like:
registry_nginx['ssl_certificate'] = "/etc/gitlab/ssl/certificate.pem"
registry_nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/certificate.key"
Self-compiled (source)
Open /home/git/gitlab/config/gitlab.yml, find the registry entry and
configure it with the following settings:
registry:
  enabled: true
  host: registry.gitlab.example.com
Save the file and restart GitLab for the changes to take effect.
Make the relevant changes in NGINX as well (domain, port, TLS certificates path).
Users should now be able to sign in to the container registry using their GitLab
credentials:





    
docker login registry.gitlab.example.com
Disable container registry site-wide
When you disable the Registry by following these steps, you do not
remove any existing Docker images. Docker image removal is handled by the
Registry application itself.
Linux package (Omnibus)
Open /etc/gitlab/gitlab.rb and set registry['enable'] to false:
registry['enable'] = false
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Open /home/git/gitlab/config/gitlab.yml, find the registry entry and
set enabled to false:
registry:
  enabled: false
Save the file and restart GitLab for the changes to take effect.
Disable container registry for new projects site-wide
If the container registry is enabled, then it should be available on all new
projects. To disable this function and let the owners of a project to enable
the container registry by themselves, follow the steps below.
Linux package (Omnibus)
Edit /etc/gitlab/gitlab.rb and add the following line:
gitlab_rails['gitlab_default_projects_features_container_registry'] = false
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Open /home/git/gitlab/config/gitlab.yml, find the default_projects_features
entry and configure it so that container_registry is set to false:
## Default project features settings
default_projects_features:
  issues: true
  merge_requests: true
  wiki: true
  snippets: false
  builds: true
  container_registry: false
Save the file and restart GitLab for the changes to take effect.
Increase token duration
In GitLab, tokens for the container registry expire every five minutes.
To increase the token duration:
On the left sidebar, at the bottom, select Admin Area.
Select Settings > CI/CD.
Expand Container Registry.
For the Authorization token duration (minutes), update the value.
Select Save changes.
Configure storage for the container registry
For storage backends that support it, you can use object versioning to preserve, retrieve, and
restore the non-current versions of every object stored in your buckets. However, this may result in
higher storage usage and costs. Due to how the registry operates, image uploads are first stored in
a temporary path and then transferred to a final location. For object storage backends, including S3
and GCS, this transfer is achieved with a copy followed by a delete. With object versioning enabled,
these deleted temporary upload artifacts are kept as non-current versions, therefore increasing the
storage bucket size. To ensure that non-current versions are deleted after a given amount of time,
you should configure an object lifecycle policy with your storage provider.
Do not directly modify the files or objects stored by the container registry. Anything other than the registry writing or deleting these entries can lead to instance-wide data consistency and instability issues from which recovery may not be possible.
You can configure the container registry to use various storage backends by
configuring a storage driver. By default the GitLab container registry
is configured to use the file system driver
configuration.
The different supported drivers are:
Driver
Description
filesystem
Uses a path on the local file system
azure
Microsoft Azure Blob Storage
Google Cloud Storage
Amazon Simple Storage Service. Be sure to configure your storage bucket with the correct S3 Permission Scopes.
Although most S3 compatible services (like MinIO) should work with the container registry,
we only guarantee support for AWS S3. Because we cannot assert the correctness of third-party S3 implementations,
we can debug issues, but we cannot patch the registry unless an issue is reproducible against an AWS S3 bucket.
Support for the following drivers was deprecated
in GitLab 16.6, and is planned for removal in 17.0. This change is a breaking change.
Use file system
If you want to store your images on the file system, you can change the storage
path for the container registry, follow the steps below.
This path is accessible to:
The user running the container registry daemon.
The user running GitLab.
All GitLab, Registry, and web server users must
have access to this directory.
Linux package (Omnibus)
The default location where images are stored in Linux package installations is
/var/opt/gitlab/gitlab-rails/shared/registry. To change it:
Edit /etc/gitlab/gitlab.rb:
gitlab_rails['registry_path'] = "/path/to/registry/storage"
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
The default location where images are stored in self-compiled installations is
/home/git/gitlab/shared/registry. To change it:
Open /home/git/gitlab/config/gitlab.yml, find the registry entry and
change the path setting:
registry:
  path: shared/registry
Save the file and restart GitLab for the changes to take effect.
Use object storage
If you want to store your images on object storage, you can change the storage
driver for the container registry.
Read more about using object storage with GitLab.
GitLab does not back up Docker images that are not stored on the
file system. Enable backups with your object storage provider if
desired.
Configure s3 and gcs storage drivers for Linux package installations
The following configuration steps are for the s3 and gcs storage drivers. Other storage drivers are supported.
To configure the s3 storage driver for a Linux package installation:
Edit /etc/gitlab/gitlab.rb:
registry['storage'] = {
  's3' => {
    'accesskey' => 's3-access-key',
    'secretkey' => 's3-secret-key-for-access-key',
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region',
    'regionendpoint' => 'your-s3-regionendpoint'
To avoid using static credentials, use an
IAM role
and omit accesskey and secretkey. Make sure that your IAM profile follows
the permissions documented by Docker.
registry['storage'] = {
  's3' => {
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region'
If using with an AWS S3 VPC endpoint,
then set regionendpoint to your VPC endpoint address and set pathstyle to false:
registry['storage'] = {
  's3' => {
    'accesskey' => 's3-access-key',
    'secretkey' => 's3-secret-key-for-access-key',
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region',
    'regionendpoint' => 'your-s3-vpc-endpoint',
    'pathstyle' => false
regionendpoint is only required when configuring an S3 compatible service such as MinIO, or
when using an AWS S3 VPC Endpoint.
your-s3-bucket should be the name of a bucket that exists, and can’t include subdirectories.
pathstyle should be set to true to use host/bucket_name/object style paths instead of
bucket_name.host/object. Set to false for AWS S3.
You can set a rate limit on connections to S3 to avoid 503 errors from the S3 API. To do this,
set maxrequestspersecond to a number within the S3 request rate threshold:
   registry['storage'] = {
   's3' => {
     'accesskey' => 's3-access-key',
     'secretkey' => 's3-secret-key-for-access-key',
     'bucket' => 'your-s3-bucket',
     'region' => 'your-s3-region',
     'regionendpoint' => 'your-s3-regionendpoint',
     'maxrequestspersecond' => 100
Save the file and reconfigure GitLab for the changes to take effect.
To configure the gcs storage driver for a Linux package installation:
Edit /etc/gitlab/gitlab.rb:
   registry['storage'] = {
   'gcs' => {
     'bucket' => 'BUCKET_NAME',
     'keyfile' => 'PATH/TO/KEYFILE',
     # If you have the bucket shared with other apps beyond the registry, uncomment the following:




    

     # 'rootdirectory' => '/gcs/object/name/prefix'
GitLab supports all available parameters.
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled installations
Configuring the storage driver is done in the registry configuration YAML file created
when you deployed your Docker registry.
s3 storage driver example:
storage:
    accesskey: 's3-access-key'                # Not needed if IAM role used
    secretkey: 's3-secret-key-for-access-key' # Not needed if IAM role used
    bucket: 'your-s3-bucket'
    region: 'your-s3-region'
    regionendpoint: 'your-s3-regionendpoint'
  cache:
    blobdescriptor: inmemory
  delete:
    enabled: true
your-s3-bucket should be the name of a bucket that exists, and can’t include subdirectories.
Migrate to object storage without downtime
Using AWS DataSync
to copy the registry data to or between S3 buckets creates invalid metadata objects in the bucket.
For additional details, see Tags with an empty name.
To move data to and between S3 buckets, the AWS CLI sync operation is recommended.
To migrate storage without stopping the container registry, set the container registry
to read-only mode. On large instances, this may require the container registry
to be in read-only mode for a while. During this time,
you can pull from the container registry, but you cannot push.
Optional: To reduce the amount of data to be migrated, run the garbage collection tool without downtime.
This example uses the aws CLI. If you haven’t configured the
CLI before, you have to configure your credentials by running sudo aws configure.
Because a non-administrator user likely can’t access the container registry folder,
ensure you use sudo. To check your credential configuration, run
ls to list
all buckets.
sudo aws --endpoint-url https://your-object-storage-backend.com s3 ls
If you are using AWS as your back end, you do not need the --endpoint-url.
Copy initial data to your S3 bucket, for example with the aws CLI
or sync
command. Make sure to keep the docker folder as the top-level folder inside the bucket.
sudo aws --endpoint-url https://your-object-storage-backend.com s3 sync registry s3://mybucket
If you have a lot of data, you may be able to improve performance by
running parallel sync operations.
To perform the final data sync,
put the container registry in read-only mode and
reconfigure GitLab.
Sync any changes dating from after the initial data load to your S3 bucket, and delete files that exist in the destination bucket but not in the source:
sudo aws --endpoint-url https://your-object-storage-backend.com s3 sync registry s3://mybucket --delete --dryrun
After verifying the command performs as expected, remove the
--dryrun
flag and run the command.
The --delete
flag deletes files that exist in the destination but not in the source.
If you swap the source and destination, all data in the Registry is deleted.
Verify all container registry files have been uploaded to object storage
by looking at the file count returned by these two commands:
sudo find registry -type f | wc -l
sudo aws --endpoint-url https://your-object-storage-backend.com s3 ls s3://mybucket --recursive | wc -l
The output of these commands should match, except for the content in the
_uploads directories and sub-directories.
Configure your registry to use the S3 bucket for storage.
For the changes to take effect, set the Registry back to read-write mode and reconfigure GitLab.
Moving to Azure Object Storage
History
The default configuration for the storage driver is scheduled to be changed in GitLab 16.0.
When moving from an existing file system or another object storage provider to Azure Object Storage, you must configure the registry to use the standard root directory.
Configure it by setting trimlegacyrootprefix: true in the Azure storage driver section of the registry configuration.
Without this configuration, the Azure storage driver uses // instead of / as the first section of the root path, rendering the migrated images inaccessible.
Linux package (Omnibus)
registry['storage'] = {
  'azure' => {
    'accountname' => 'accountname',
    'accountkey' => 'base64encodedaccountkey',
    'container' => 'containername',
    'rootdirectory' => '/azure/virtual/container',
    'trimlegacyrootprefix' => true
Self-compiled (source)
storage:
  azure:
    accountname: accountname
    accountkey: base64encodedaccountkey
    container: containername
    rootdirectory: /azure/virtual/container
    trimlegacyrootprefix: true
By default, Azure Storage Driver uses the core.windows.net realm. You can set another value for realm in the azure section (for example, core.usgovcloudapi.net for Azure Government Cloud).
Disable redirect for storage driver
By default, users accessing a registry configured with a remote backend are redirected to the default backend for the storage driver. For example, registries can be configured using the s3 storage driver, which redirects requests to a remote S3 bucket to alleviate load on the GitLab server.
However, this behavior is undesirable for registries used by internal hosts that usually can’t access public servers. To disable redirects and proxy download, set the disable flag to true as follows. This makes all traffic always go through the Registry service. This results in improved security (less surface attack as the storage backend is not publicly accessible), but worse performance (all traffic is redirected via the service).
Linux package (Omnibus)
Edit /etc/gitlab/gitlab.rb:
registry['storage'] = {
  's3' => {
    'accesskey' => 's3-access-key',
    'secretkey' => 's3-secret-key-for-access-key',
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region',
    'regionendpoint' => 'your-s3-regionendpoint'
  'redirect' => {
    'disable' => true
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Add the redirect flag to your registry configuration YAML file:
storage:
    accesskey: 'AKIAKIAKI'
    secretkey: 'secret123'
    bucket: 'gitlab-registry-bucket-AKIAKIAKI'
    region: 'your-s3-region'
    regionendpoint: 'your-s3-regionendpoint'
  redirect:
    disable: true
  cache:
    blobdescriptor: inmemory
  delete:
    enabled: true
Save the file and restart GitLab for the changes to take effect.
Encrypted S3 buckets
You can use server-side encryption with AWS KMS for S3 buckets that have
SSE-S3 or SSE-KMS encryption enabled by default.
Customer master keys (CMKs) and SSE-C encryption aren’t supported because this requires sending the
encryption keys in every request.
For SSE-S3, you must enable the encrypt option in the registry settings. How you do this depends
on how you installed GitLab. Follow the instructions here that match your installation method.
Linux package (Omnibus)
Edit /etc/gitlab/gitlab.rb:
registry['storage'] = {
  's3' => {
    'accesskey' => 's3-access-key',
    'secretkey' => 's3-secret-key-for-access-key',
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region',
    'regionendpoint' => 'your-s3-regionendpoint',
    'encrypt' => true
Save the file and reconfigure GitLab
for the changes to take effect.
Self-compiled (source)
Edit your registry configuration YAML file:
storage:
    accesskey: 'AKIAKIAKI'
    secretkey: 'secret123'
    bucket: 'gitlab-registry-bucket-AKIAKIAKI'
    region: 'your-s3-region'
    regionendpoint: '




    
your-s3-regionendpoint'
    encrypt: true
Save the file and restart GitLab
for the changes to take effect.
Storage limitations
There is no storage limitation, which means a user can upload an
infinite amount of Docker images with arbitrary sizes. This setting should be
configurable in future releases.
Change the registry’s internal port
The Registry server listens on localhost at port 5000 by default,
which is the address for which the Registry server should accept connections.
In the examples below we set the Registry’s port to 5010.
Linux package (Omnibus)
Open /etc/gitlab/gitlab.rb and set registry['registry_http_addr']:
registry['registry_http_addr'] = "localhost:5010"
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Open the configuration file of your Registry server and edit the
http:addr value:
http:
  addr: localhost:5010
Save the file and restart the Registry server.
Disable container registry per project
If Registry is enabled in your GitLab instance, but you don’t need it for your
project, you can disable it from your project’s settings.
Use an external container registry with GitLab as an auth endpoint
Using third-party container registries in GitLab was deprecated
in GitLab 15.8 and support ended in GitLab 16.0.
If you need to use third-party container registries instead of the GitLab container registry,
tell us about your use cases in feedback issue 958.
If you use an external container registry, some features associated with the
container registry may be unavailable or have inherent risks.
For the integration to work, the external registry must be configured to
use a JSON Web Token to authenticate with GitLab. The
external registry’s runtime configuration
must have the following entries:
auth:
  token:
    realm: https://gitlab.example.com/jwt/auth
    service: container_registry
    issuer: gitlab-issuer
    rootcertbundle: /root/certs/certbundle
Without these entries, the registry logins cannot authenticate with GitLab.
GitLab also remains unaware of
nested image names
under the project hierarchy, like
registry.example.com/group/project/image-name:tag or
registry.example.com/group/project/my/image-name:tag, and only recognizes
registry.example.com/group/project:tag.
Linux package installations
You can use GitLab as an auth endpoint with an external container registry.
Open /etc/gitlab/gitlab.rb and set necessary configurations:
gitlab_rails['registry_enabled'] = true
gitlab_rails['registry_api_url'] = "https://<external_registry_host>:5000"
gitlab_rails['registry_issuer'] = "gitlab-issuer"
gitlab_rails['registry_enabled'] = true is needed to enable GitLab
container registry features and authentication endpoint. The GitLab bundled
container registry service does not start, even with this enabled.
gitlab_rails['registry_api_url'] = "http://<external_registry_host>:5000"
must be changed to match the host where Registry is installed.
It must also specify https if the external registry is
configured to use TLS.
A certificate-key pair is required for GitLab and the external container
registry to communicate securely. You need to create a certificate-key
pair, configuring the external container registry with the public
certificate (rootcertbundle) and configuring GitLab with the private key.
To do that, add the following to /etc/gitlab/gitlab.rb:
# registry['internal_key'] should contain the contents of the custom key
# file. Line breaks in the key file should be marked using `\n` character
# Example:
registry['internal_key'] = "---BEGIN RSA PRIVATE KEY---\nMIIEpQIBAA\n"
# Optionally define a custom file for a Linux package installation to write the contents
# of registry['internal_key'] to.
gitlab_rails['registry_key_path'] = "/custom/path/to/registry-key.key"
Each time reconfigure is executed, the file specified at registry_key_path
gets populated with the content specified by internal_key. If
no file is specified, Linux package installations default it to
/var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key and populates
To change the container registry URL displayed in the GitLab Container
Registry pages, set the following configurations:
gitlab_rails['registry_host'] = "registry.gitlab.example.com"
gitlab_rails['registry_port'] = "5005"
Save the file and reconfigure GitLab
for the changes to take effect.
Self-compiled installations
Open /home/git/gitlab/config/gitlab.yml, and edit the configuration settings under registry:
## Container registry
registry:
  enabled: true
  host: "registry.gitlab.example.com"
  port: "5005"
  api_url: "https://<external_registry_host>:5000"
  path: /var/lib/registry
  key: /path/to/keyfile
  issuer: gitlab-issuer
Read more about what these parameters mean.
Save the file and restart GitLab for the changes to take effect.
Configure container registry notifications
You can configure the container registry to send webhook notifications in
response to events happening in the registry.
Read more about the container registry notifications configuration options in the
Docker Registry notifications documentation.
Support for the threshold parameter was deprecated
in GitLab 17.0, and is planned for removal in 18.0. Use maxretries instead.
You can configure multiple endpoints for the container registry.
Linux package (Omnibus)
To configure a notification endpoint for a Linux package installation:
Edit /etc/gitlab/gitlab.rb:
registry['notifications'] = [
    'name' => 'test_endpoint',
    'url' => 'https://gitlab.example.com/notify',
    'timeout' => '500ms',
    'threshold' => 5, # DEPRECATED: use `maxretries` instead.
    'maxretries' => 5,
    'backoff' => '1s',
    'headers' => {
      "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"]
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Configuring the notification endpoint is done in your registry configuration YAML file created
when you deployed your Docker registry.
Example:
notifications:
  endpoints:
    - name: alistener
      disabled: false
      url: https://my.listener.com/event
      headers: <http.Header>
      timeout: 500
      threshold: 5 # DEPRECATED: use `maxretries` instead.
      maxretries: 5
      backoff: 1000
Run the Cleanup policy now
If you’re using a distributed architecture and Sidekiq is running on a different node, the cleanup
policies don’t work. To fix this:
Configure the gitlab.rb file on the Sidekiq nodes to
point to the correct registry URL.
Copy the registry.key file to each Sidekiq node.
For more information, see the Sidekiq configuration
page.
To reduce the amount of Container Registry disk space used by a given project,
administrators can set up cleanup policies
and run garbage collection.
Registry Disk Space Usage by Project
To find the disk space used by each project, run the following in the
GitLab Rails console:
projects_and_size = [["project_id", "creator_id", "registry_size_bytes", "project path"]]
# You need to specify the projects that you want to look through. You can get these in any manner.
projects = Project.last(100)
projects.each do




    
 |p|
   project_total_size = 0
   container_repositories = p.container_repositories
   container_repositories.each do |c|
       c.tags.each do |t|
          project_total_size = project_total_size + t.total_size unless t.total_size.nil?
   if project_total_size > 0
      projects_and_size << [p.project_id, p.creator&.id, project_total_size, p.full_path]
# print it as comma separated output
projects_and_size.each do |ps|
   puts "%s,%s,%s,%s" % ps
To remove image tags by running the cleanup policy, run the following commands in the
GitLab Rails console:
# Numeric ID of the project whose container registry should be cleaned up
P = <project_id>
# Numeric ID of a user with Developer, Maintainer, or Owner role for the project
U = <user_id>
# Get required details / objects
user    = User.find_by_id(U)
project = Project.find_by_id(P)
policy  = ContainerExpirationPolicy.find_by(project_id: P)
# Loop through each container repository
project.container_repositories.find_each do |repo|
  puts repo.attributes
  # Start the tag cleanup
  puts Projects::ContainerRepository::CleanupTagsService.new(container_repository: repo, current_user: user, params: policy.attributes.except("created_at", "updated_at")).execute
You can also run cleanup on a schedule.
To enable cleanup policies for all projects instance-wide, you need to find all projects
with a container registry, but with the cleanup policy disabled:
# Find all projects where Container registry is enabled, and cleanup policies disabled
projects = Project.find_by_sql ("SELECT * FROM projects WHERE id IN (SELECT project_id FROM container_expiration_policies WHERE enabled=false AND id IN (SELECT project_id FROM container_repositories))")
# Loop through each project
projects.each do |p|
# Print project IDs and project full names
    puts "#{p.id},#{p.full_name}"
Container registry metadata database
Tier: Free, Premium, Ultimate
Offering: Self-managed
Status: Beta

The metadata database enables many new registry features, including
online garbage collection, and increases the efficiency of many registry operations.
See the Container registry metadata database page for details.
Container registry garbage collection
Retention policies in your object storage provider, such as Amazon S3 Lifecycle, may prevent
objects from being properly deleted.
The container registry can use considerable amounts of storage space, and you might want to
reduce storage usage.
Among the listed options, deleting tags is the most effective option. However, tag deletion
alone does not delete image layers, it only leaves the underlying image manifests untagged.
To more effectively free up space, the container registry has a garbage collector that can
delete unreferenced layers and (optionally) untagged manifests.
To start the garbage collector, use the registry-garbage-collect command provided by gitlab-ctl.
This command shuts down the container registry prior to the garbage collection and
only starts it again after garbage collection completes. If you prefer to avoid downtime,
you can manually set the container registry to read-only mode and bypass gitlab-ctl.
The time required to perform garbage collection is proportional to the container registry data size.
Prerequisites:
You must have installed GitLab by using a Linux package or the
GitLab Helm chart.
Understanding the content-addressable layers
Consider the following example, where you first build the image:
# This builds a image with content of sha256:111111
docker build -t my.registry.com/my.group/my.project:latest .
docker push my.registry.com/my.group/my.project:latest
Now, you do overwrite :latest with a new version:
# This builds a image with content of sha256:222222
docker build -t my.registry.com/my.group/my.project:latest .
docker push my.registry.com/my.group/my.project:latest
Now, the :latest tag points to manifest of sha256:222222.
Due to the architecture of registry, this data is still accessible when pulling the
image my.registry.com/my.group/my.project@sha256:111111, though it is
no longer directly accessible via the :latest tag.
Remove unreferenced layers
Image layers are the bulk of the container registry storage. A layer is considered
unreferenced when no image manifest references it. Unreferenced layers are the
default target of the container registry garbage collector.
If you did not change the default location of the configuration file, run:
sudo gitlab-ctl registry-garbage-collect
If you changed the location of the container registry config.yml:
sudo gitlab-ctl registry-garbage-collect /path/to/config.yml
You can also remove all untagged manifests and unreferenced layers
to recover additional space.
Removing untagged manifests and unreferenced layers
By default the container registry garbage collector ignores images that are untagged,
and users can keep pulling untagged images by digest. Users can also re-tag images
in the future, making them visible again in the GitLab UI and API.
If you do not care about untagged images and the layers exclusively referenced by these images,
you can delete them all. Use the -m flag on the registry-garbage-collect command:
sudo gitlab-ctl registry-garbage-collect -m
If you are unsure about deleting untagged images, back up your registry data before proceeding.
Performing garbage collection without downtime
To do garbage collection while keeping the container registry online, put the registry
in read-only mode and bypass the built-in gitlab-ctl registry-garbage-collect command.
You can pull but not push images while the container registry is in read-only mode. The container
registry must remain in read-only for the full duration of the garbage collection.
By default, the registry storage path
is /var/opt/gitlab/gitlab-rails/shared/registry.
To enable the read-only mode:
In /etc/gitlab/gitlab.rb, specify the read-only mode:
  registry['storage'] = {
    'filesystem' => {
      'rootdirectory' => "<your_registry_storage_path>"
    'maintenance' => {
      'readonly' => {
        'enabled' => true
Save and reconfigure GitLab:
sudo gitlab-ctl reconfigure
This command sets the container registry into the read-only mode.
Next, trigger one of the garbage collect commands:
# Remove unreferenced layers
sudo /opt/gitlab/embedded/bin/registry garbage-collect /var/opt/gitlab/registry/config.yml
# Remove untagged manifests and unreferenced layers
sudo /opt/gitlab/embedded/bin/registry garbage-collect -m /var/opt/gitlab/registry/config.yml
This command starts the garbage collection. The time to complete is proportional to the registry data size.
Once done, in /etc/gitlab/gitlab.rb change it back to read-write mode:
 registry['storage'] = {
   'filesystem' => {
     'rootdirectory' => "<your_registry_storage_path>"
   'maintenance' => {
     'readonly' => {
       'enabled' => false
Save and reconfigure GitLab:
sudo gitlab-ctl reconfigure
Running the garbage collection on schedule
Ideally, you want to run the garbage collection of the registry regularly on a
weekly basis at a time when the registry is not being in-use.
The simplest way is to add a new crontab job that it runs periodically
once a week.
Create a file under /etc/cron.d/registry-garbage-collect:





    
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# Run every Sunday at 04:05am
5 4 * * 0  root gitlab-ctl registry-garbage-collect
You may want to add the -m flag to remove untagged manifests and unreferenced layers.
Stop garbage collection
If you anticipate stopping garbage collection, you should manually run garbage collection as
described in Performing garbage collection without downtime.
You can then stop garbage collection by pressing Control+C.
Otherwise, interrupting gitlab-ctl could leave your registry service in a down state. In this
case, you must find the garbage collection process
itself on the system so that the gitlab-ctl command can bring the registry service back up again.
Also, there’s no way to save progress or results during the mark phase of the process. Only once
blobs start being deleted is anything permanent done.
Continuous Zero-Downtime Garbage Collection
Status: Beta

You can run garbage collection in the background without the need to schedule it or require read-only mode,
if you migrate to the metadata database.
If you would like to try this beta feature,
you should review the known limitations. If you have any feedback,
you can let us know in the feedback issue.
Configure GitLab and Registry to run on separate nodes (Linux package installations)
By default, package assumes that both services are running on the same node.
To get GitLab and Registry to run on a separate nodes, separate configuration
is necessary for Registry and GitLab.
Configure Registry
Below you can find configuration options you should set in /etc/gitlab/gitlab.rb,
for Registry to run separately from GitLab:
registry['registry_http_addr'], default set programmatically. Needs to be reachable by web server (or LB).
registry['token_realm'], default set programmatically. Specifies the endpoint to use to perform authentication, usually the GitLab URL.
This endpoint needs to be reachable by user.
registry['http_secret'], random string. A random piece of data used to sign state that may be stored with the client to protect against tampering.
registry['internal_key'], default automatically generated. Contents of the key that GitLab uses to sign the tokens. They key gets created on the Registry server, but it is not used there.
gitlab_rails['registry_key_path'], default set programmatically. This is the path where internal_key contents are written to disk.
registry['internal_certificate'], default automatically generated. Contents of the certificate that GitLab uses to sign the tokens.
registry['rootcertbundle'], default set programmatically. Path to certificate. This is the path where internal_certificate
contents are written to disk.
registry['health_storagedriver_enabled'], default set programmatically. Configure whether health checks on the configured storage driver are enabled.
gitlab_rails['registry_issuer'], default value. This setting needs to be set the same between Registry and GitLab.
Configure GitLab
Below you can find configuration options you should set in /etc/gitlab/gitlab.rb,
for GitLab to run separately from Registry:
gitlab_rails['registry_enabled'], must be set to true. This setting
signals to GitLab that it should allow Registry API requests.
gitlab_rails['registry_api_url'], default set programmatically. This is the Registry URL used internally that users do not need to interact with, registry['registry_http_addr'] with scheme.
gitlab_rails['registry_host'], for example, registry.gitlab.example. Registry endpoint without the scheme, the address that gets shown to the end user.
gitlab_rails['registry_port']. Registry endpoint port, visible to the end user.
gitlab_rails['registry_issuer'] must match the issuer in the Registry configuration.
gitlab_rails['registry_key_path'], path to the key that matches the certificate on the
Registry side.
gitlab_rails['internal_key'], contents of the key that GitLab uses to sign the tokens.
Architecture of GitLab container registry
The GitLab registry is what users use to store their own Docker images.
Because of that the Registry is client facing, meaning that we expose it directly
on the web server (or load balancers, LB for short).
The flow described by the diagram above:
A user runs docker login registry.gitlab.example on their client. This reaches the web server (or LB) on port 443.
Web server connects to the Registry backend pool (by default, using port 5000). Since the user
didn’t provide a valid token, the Registry returns a 401 HTTP code and the URL (token_realm from
Registry configuration) where to get one. This points to the GitLab API.
The Docker client then connects to the GitLab API and obtains a token.
The API signs the token with the registry key and hands it to the Docker client
The Docker client now logs in again with the token received from the API. It can now push and pull Docker images.
Reference: https://distribution.github.io/distribution/spec/auth/token/
Communication between GitLab and Registry
Registry doesn’t have a way to authenticate users internally so it relies on
GitLab to validate credentials. The connection between Registry and GitLab is
TLS encrypted. The key is used by GitLab to sign the tokens while the certificate
is used by Registry to validate the signature. By default, a self-signed certificate key pair is generated
for all installations. This can be overridden as needed.
GitLab interacts with the Registry using the Registry private key. When a Registry
request goes out, a new short-living (10 minutes) namespace limited token is generated
and signed with the private key.
The Registry then verifies that the signature matches the registry certificate
specified in its configuration and allows the operation.
GitLab background jobs processing (through Sidekiq) also interacts with Registry.
These jobs talk directly to Registry to handle image deletion.
Migrate from a third-party registry
Using external container registries in GitLab was deprecated
in GitLab 15.8 and the end of support occurred in GitLab 16.0. See the deprecation notice for more details.
The integration is not disabled in GitLab 16.0, but support for debugging and fixing issues
is no longer provided. Additionally, the integration is no longer being developed or
enhanced with new features. Third-party registry functionality might be completely removed
after the new GitLab container registry version is available for self-managed (see epic 5521). Only the GitLab container registry is planned to be supported.
This section has guidance for administrators migrating from third-party registries
to the GitLab container registry. If the third-party container registry you are using is not listed here,
you can describe your use cases in the feedback issue.
For all of the instructions provided below, you should try them first on a test environment.
Make sure everything continues to work as expected before replicating it in production.
Docker Distribution Registry
The Docker Distribution Registry was donated to the CNCF
and is now known as the Distribution Registry.
This registry is the open source implementation that the GitLab container registry is based on.
The GitLab container registry is compatible with the basic functionality provided by the Distribution Registry,
including all the supported storage backends. To migrate to the GitLab container registry
you can follow the instructions on this page, and use the same storage backend as the Distribution Registry.
The GitLab container registry should accept the same configuration that you are using for the Distribution Registry.
Troubleshooting
Before diving in to the following sections, here’s some basic troubleshooting:
Check to make sure that the system clock on your Docker client and GitLab server have
been synchronized (for example, via NTP).
If you are using an S3-backed Registry, double check that the IAM
permissions and the S3 credentials (including region) are correct. See
the sample IAM policy
for more details.
Check the Registry logs (for example /var/log/gitlab/registry/current) and the GitLab production logs
for errors (for example /var/log/gitlab/gitlab-rails/production.log). You may be able to find clues
there.
Using self-signed certificates with container registry
If you’re using a self-signed certificate with your container registry, you
might encounter issues during the CI jobs like the following:
Error response from daemon: Get registry.example.com/v1/users/: x509: certificate signed by unknown authority
The Docker daemon running the command expects a cert signed by a recognized CA,
thus the error above.
While GitLab doesn’t support using self-signed certificates with Container
Registry out of the box, it is possible to make it work by
instructing the Docker daemon to trust the self-signed certificates,
mounting the Docker daemon and setting privileged = false in the GitLab Runner
config.toml file. Setting privileged = true takes precedence over the Docker daemon:
  [runners.docker]
    image = "ruby:2.6"
    privileged = false
    volumes = ["/var/run/docker.sock:/var/run/docker.sock", "/cache"]
Additional information about this: issue 18239.
Docker login attempt fails with: ‘token signed by untrusted key’
Registry relies on GitLab to validate credentials
If the registry fails to authenticate valid login attempts, you get the following error message:
# docker login gitlab.company.com:4567
Username: user
Password:
Error response from daemon: login attempt to https://gitlab.company.com:4567/v2/ failed with status: 401 Unauthorized
And more specifically, this appears in the /var/log/gitlab/registry/current log file:
level=info msg="token signed by untrusted key with ID: "TOKE:NL6Q:7PW6:EXAM:PLET:OKEN:BG27:RCIB:D2S3:EXAM:PLET:OKEN""
level=warning msg="error authorizing context: invalid token" go.version=go1.12.7 http.request.host="gitlab.company.com:4567" http.request.id=74613829-2655-4f96-8991-1c9fe33869b8 http.request.method=GET http.request.remoteaddr=10.72.11.20 http.request.uri="/v2/" http.request.useragent="docker/19.03.2 go/go1.12.8 git-commit/6a30dfc kernel/3.10.0-693.2.2.el7.x86_64 os/linux arch/amd64 UpstreamClient(Docker-Client/19.03.2 \(linux\))"
GitLab uses the contents of the certificate key pair’s two sides to encrypt the authentication token
for the Registry. This message means that those contents do not align.
Check which files are in use:
grep -A6 'auth:' /var/opt/gitlab/registry/config.yml
## Container registry certificate
   auth:
     token:
       realm: https://gitlab.my.net/jwt/auth
       service: container_registry
       issuer: omnibus-gitlab-issuer
  -->  rootcertbundle: /var/opt/gitlab/registry/gitlab-registry.crt
       autoredirect: false
grep -A9 'Container Registry' /var/opt/gitlab/gitlab-rails/etc/gitlab.yml
## Container registry key
   registry:
     enabled: true
     host: gitlab.company.com
     port: 4567
     api_url: http://127.0.0.1:5000 # internal address to the registry, is used by GitLab to directly communicate with API
     path: /var/opt/gitlab/gitlab-rails/shared/registry
-->  key: /var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key
     issuer: omnibus-gitlab-issuer
     notification_secret:
The output of these openssl commands should match, proving that the cert-key pair is a match:
/opt/gitlab/embedded/bin/openssl x509 -noout -modulus -in /var/opt/gitlab/registry/gitlab-registry.crt | /opt/gitlab/embedded/bin/openssl sha256
/opt/gitlab/embedded/bin/openssl rsa -noout -modulus -in /var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key | /opt/gitlab/embedded/bin/openssl sha256
If the two pieces of the certificate do not align, remove the files and run gitlab-ctl reconfigure
to regenerate the pair. The pair is recreated using the existing values in /etc/gitlab/gitlab-secrets.json if they exist. To generate a new pair,
delete the registry section in your /etc/gitlab/gitlab-secrets.json before running gitlab-ctl reconfigure.
If you have overridden the automatically generated self-signed pair with
your own certificates and have made sure that their contents align, you can delete the ‘registry’
section in your /etc/gitlab/gitlab-secrets.json and run gitlab-ctl reconfigure.
AWS S3 with the GitLab registry error when pushing large images
When using AWS S3 with the GitLab registry, an error may occur when pushing
large images. Look in the Registry log for the following error:
level=error msg="response completed with error" err.code=unknown err.detail="unexpected EOF" err.message="unknown error"
To resolve the error specify a chunksize value in the Registry configuration.
Start with a value between 25000000 (25 MB) and 50000000 (50 MB).
Linux package (Omnibus)
Edit /etc/gitlab/gitlab.rb:
registry['storage'] = {
  's3' => {
    'accesskey' => 'AKIAKIAKI',
    'secretkey' => 'secret123',
    'bucket'    => 'gitlab-registry-bucket-AKIAKIAKI',
    'chunksize' => 25000000
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Edit config/gitlab.yml:
storage:
    accesskey: 'AKIAKIAKI'
    secretkey: 'secret123'
    bucket: 'gitlab-registry-bucket-AKIAKIAKI'
    chunksize: 25000000
Save the file and restart GitLab for the changes to take effect.
Supporting older Docker clients
The Docker container registry shipped with GitLab disables the schema1 manifest
by default. If you are still using older Docker clients (1.9 or older), you may
experience an error pushing images. See
issue 4145 for more details.
You can add a configuration option for backwards compatibility.
Linux package (Omnibus)
Edit /etc/gitlab/gitlab.rb:
registry['compatibility_schema1_enabled'] = true
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Edit the YAML configuration file you created when you deployed the registry. Add the following snippet:
compatibility:
    schema1:
        enabled: true
Restart the registry for the changes to take affect.
Docker connection error
A Docker connection error can occur when there are special characters in either the group,
project or branch name. Special characters can include:
Leading underscore
Trailing hyphen/dash
Double hyphen/dash
To get around this, you can change the group path,
change the project path or change the
branch name. Another option is to create a push rule to prevent
this at the instance level.
Image push errors
When getting errors or “retrying” loops in an attempt to push an image but docker login works fine,
there is likely an issue with the headers forwarded to the registry by NGINX. The default recommended
NGINX configurations should handle this, but it might occur in custom setups where the SSL is
offloaded to a third party reverse proxy.
This problem was discussed in a Docker project issue
and a simple solution would be to enable relative URLs in the Registry.
Linux package (Omnibus)
Edit /etc/gitlab/gitlab.rb:
registry['env'] = {
  "REGISTRY_HTTP_RELATIVEURLS" => true
Save the file and reconfigure GitLab for the changes to take effect.
Self-compiled (source)
Edit the YAML configuration file you created when you deployed the registry. Add the following snippet:
http:
    relativeurls: true
Save the file and restart GitLab for the changes to take effect.
Enable the Registry debug server
You can use the container registry debug server to diagnose problems. The debug endpoint can monitor metrics and health, as well as do profiling.
Sensitive information may be available from the debug endpoint.
Access to the debug endpoint must be locked down in a production environment.
The optional debug server can be enabled by setting the registry debug address
in your gitlab.rb configuration.
registry['debug_addr'] = "localhost:5001"
After adding the setting, reconfigure GitLab to apply the change.
Use curl to request debug output from the debug server:
curl "localhost:5001/debug/health"
curl "localhost:5001/debug/vars"
Tags with an empty name
If using AWS DataSync
to copy the registry data to or between S3 buckets, an empty metadata object is created in the root
path of each container repository in the destination bucket. This causes the registry to interpret
such files as a tag that appears with no name in the GitLab UI and API. For more information, see
this issue.
To fix this you can do one of two things:
Use the AWS CLI rm
command to remove the empty objects from the root of each affected repository. Pay special
attention to the trailing / and make sure not to use the --recursive option:
aws s3 rm s3://<bucket>/docker/registry/v2/repositories/<path to repository>/
Use the AWS CLI